Useful Tips

Skin Care Basic Rules, Recommendations

Pin
Send
Share
Send
Send


Giving a readable look to an article is often not easy, as the Word automatically emphasizes words, or even whole sentences, which completely does not add beauty. Why does a wavy red line appear under the word? The answer is simple, the Word editor encounters an unfamiliar word or an error in it, emphasizes it, thereby focusing the user's attention on a specific piece of text. Correcting the “visual irritant” is not difficult, as it seems at first glance. There are several ways you can easily remove the underline of text in Word. Let's take a look at it, starting with a red wavy line.

How to remove the red wavy line?

If the word is underlined by a red winding line, it means that the program found a spelling error or the word simply does not exist in the Word Dictionary.

To remove the underline, you must place the cursor on the word and right-click. In the pop-up window, the Word program will suggest the correct spelling. If there are no suggested options, then you need to select the line “Add to dictionary”. When writing this word further, Word will not emphasize it anymore. It happens that the word is added, but it is still underlined with a red line, what to do? This is due to the fact that other forms of the word are unknown to the program. So, you need to add all the options. Click on the "Red Word" with the right mouse button and select "Spelling".

In the window that opens, in the "Not in the dictionary" field, the same word unfamiliar to Word is highlighted in red, which must be added to the dictionary. Add by clicking on the button on the right “Add”.

There is a way to quickly remove all the red underscores in just two clicks. Place the mouse pointer on any word underlined in red and, by clicking on the right mouse button, select “Skip all”. Thus, all red underlining of the text disappears, so you can easily skip all errors at once.

Pay attention to places with a red underline. It happens that the Word underlines the text not only with an error, but also when a space is missing. The picture below is a good example.

Green underline in Word

If you omit commas in the text, the Word will automatically underline the green wavy line in the right place, as punctuation errors are made. You can remove the green underline of the text only by putting a punctuation mark (comma, semicolon, dash, or dot). If you are sure that the underlined text does not need a comma, then click on the “Skip sentence” and the wavy green line will disappear.

How to remove the blue line in the text

When a document has a blue wavy line, this is a sign of incorrect formatting. If one part of the text is in one font and the second part is in another, then a blue wavy line will appear. You can simply remove the blue line by applying a single font to the entire text. Or use the three methods described below.

Click on the blue place with the right mouse button and select the option you want:

  1. “Replace direct formatting with the style of the main text” - the main font, which prevails in most of the article, will be applied to the text.
  2. “Skip” - the text format will not change, but the blue wavy line will be deleted.
  3. “Skip rule” - all subsequent sections with problematic formatting will be skipped.

How to disable underscores in text

Go to “File” - “Options” - the line “Spelling”.

Next, in the "Exceptions for the file" column, check the boxes next to the lines "Hide ... only in this document" and click on the "OK" button.

No more annoying red or green lines appear in the document.

In the most popular text editor MS Word there are built-in tools for checking spelling. So, if AutoCorrect is enabled, some errors and typos will be corrected automatically. If the program detects an error in a particular word, or even does not know it at all, it underlines this word (words, phrases) with a red wavy line.

Note: Word also underscores words written in a language other than the language of the spell checkers.

As you understand, all of these underscores in the document are needed in order to indicate to the user the committed oprographic and grammatical errors, and in many cases this helps a lot. However, as mentioned above, the program also emphasizes unknown words. If you do not want to see these “pointers” in the document with which you are working, you will probably be interested in our instruction on how to remove the underlining of errors in Word.

1. Open the menu "File" by clicking on the far left button at the top of the control panel in Word 2012 - 2016, or by clicking on the button “MS Office” if you are using an earlier version of the program.

2. Open the section "Options" (previously “Word Options” ).

3. Select the section in the window that opens "Spelling" .

4. Find the section “File Exception” and check there opposite two points “Hide ... errors in this document only” .

5. After you close the window "Options" , you will no longer see intrusive red underscores in this text document.

Add underlined word to dictionary

Often, when the Word does not know a particular word, emphasizing it, the program also offers possible correction options, which can be seen after right-clicking on the underlined word. If the options present there do not suit you, but you are sure of the correct spelling of the word, or simply do not want to correct it, you can remove the red underline by adding the word to the Word dictionary or by skipping its verification.

1. Right-click on the underlined word.

2. In the menu that appears, select the required command: "Skip" or “Add to Dictionary” .

3. The underline will disappear. Repeat steps if necessary. 1-2 and for other words.

Note: If you often work with programs of the MS Office package, add unknown words to the dictionary, at some point the program may suggest that you send all these words to Microsoft for consideration. It is possible that it is thanks to your efforts that the dictionary of the text editor will become more extensive.

Actually, that’s the whole secret of how to remove underlining in Word. Now you know more about this multifunctional program and even know how you can replenish its vocabulary. Write correctly and avoid mistakes, success in your work and training.

In the section on the question, Word underlines in red almost the entire text, how to remove all the red lines set by the author at once Flush the best answer is Listen. It is necessary to select all the text, for example, through the Edit menu - Select all or simply by pressing Ctrl + F. Then, carefully so that the selection does not fail, you find the section Service - Language - Select Language in the menu. A window will open in which there will be a table with the names of languages ​​in the upper part, and in the bottom two lines with squares on the left.
1 line - Do not check spelling.
You need to put a check in this box, and then save the changes, for example, by pressing Ctrl + S / S or through the menu - File - Save.
Or you can also at the top of the Language window - select a language, specify any language for which there is no dictionary and which Word will not check for sure. For example, Albanian)) and save. Now, the language setting will be saved in this file, in which the word test will not be done. The task is completed, the goal is achieved.
Superfood Brain
Sage
(12802)
The dumbest comment. What for comment so?
Or didn’t you read the question?
So read it again, ten more times, maybe you’ll understand, Albanian nerd.

Answer from Clearing [guru]
What confuses underlining? You can remove the red lines only in your Word, and another's Word will emphasize everything again.

Answer from Irina Robertovna Makhrakova [guru]
This sometimes happens when switching from English to Russian. Try switching to Russian twice twice in a row - this method once worked pretty well for me.

Answer from Give advice [guru]
1. Choose Russian for the text, if you want to save word wraps along the edge of the page, as in a book - through a hyphen.
or
2. Select Language - No check if word wrap is enough.

Answer from Yotas Marchenko [newbie]
This sometimes happens when switching from English to Russian.

Answer from (NE PLAST) [active]
Service-options-flagging fixes: inserts (none)

Answer from BaTaR kUnNiN aTaR TaNi BaR. [newbie]
Very simple. Word. Up Reviewing. Choose a language. There is a globe, the book is underlined. Do not check spelling.

Answer from Vitaly Lyaskovsky [newbie]
Learning to write correctly) it's simple!

Answer from Yorgey Pryadko [newbie]
For microsf word 10
1. left-click on the text so that the cursor blinks
2. Then simultaneously press Ctrl + A
3. Then (carefully so that the selection is not lost), select the "Review" in the upper tab
4. find the "Language" button with the down arrow
5. click on the arrow and select "Spell-checker language" in the drop-down menu
6. The "Language" window opens with the inscription "mark selected text as"
7. If the document was created in Ukrainian and you write in Russian, then simply change the selected text to Russian and vice versa
P.S. If you still want to emphasize the text, try contacting the school so that you are taught spelling there, maybe it's just your illiteracy!

Word text editor has a large number of built-in tools that simplify working with text documents. For example, Word can check typed text for grammar and spelling errors. Found errors are underlined in red and the user is offered correction options. But, in some cases, such an emphasis is more distracting from work than it helps. For example, if the text contains a large number of technical terms, then it will simply be filled with red underscores.

If you encounter such a problem, then we offer you three methods at once, how you can remove the red underline from a Word document. These methods are illustrated by the example of Word 2016, but they should also work in Word 2013, 2010 and 2007.

Method number 1. Choosing the right language to check for errors.

As we said, red underscores indicate errors in the text. But, there may be a situation where there are no errors, but Word is trying to check the text according to the rules of another language and this leads to the fact that the text is underlined by a red line. In this case, you can remove the red underscores by simply telling Word the language in which to check for errors.

In order to change the test language, you need to select the text underlined with a red line (or the entire text of the document), and click on the language name, which is located at the bottom of the Word program window.

As a result, a small window will appear where you can specify the language for the selected text fragment.

After you specify the correct language, the red underscore will disappear.

Method number 2. Adding a word to the dictionary or skipping errors.

In some cases, Word may underline red words with unknown words. If you want to remove such underlining, then this can be done in two ways, you can add a word to the dictionary or simply skip this error. To do this, right-click on the underlined word and open the "Spelling" menu.

Two options will be available here: Add to Dictionary and Skip All. If you select the first option, the word will be added to the dictionary and after that it will no longer be underlined by the red line as erroneous, and if you select the second option, the Word will simply skip this error.

Method number 3. Disable full text check for errors.

If you do not need to check the text for errors, then you can completely turn off the red underline in Word. To do this, click on the "File" button and go to the "Options - Spelling" section. Many settings are available here that allow you to disable the checks that Word performs.

For example, you can disable spelling and grammar errors during typing. In this case, spelling and grammar checking will be disabled for all documents.

At the bottom of the options list is an exception block that only works for this file.

Using these exceptions, you can remove the red underline only for the current Word document.

Microsoft Word is a handy tool for creating text files. Program options allow you to beautifully and competently draw up documents for official, business or personal correspondence. Sometimes some editor functions cause slight irritation. Let's look at how to remove the red underline of the text in the Word, and consider situations when it is really needed.

We remove various lines

Underline in Word can be different, if the default is a standard solid line, then if desired, it can be double, wavy, dashed or any other, it can emphasize words only, while spaces remain untouched. Depending on how the text is emphasized, it will be necessary to remove the underscores in different ways.

If the text is underlined using the standard Microsoft Word underline function, you can remove it as follows:

1. Select the text from which you want to remove the underline.

2. Go to the "home "And pay attention to the item"Font ».

3. Click on the “H».

4. Position the cursor after the last character in the document (where you will start writing further) and see if it is worth using this formatting for the subsequent text (is the "H"). If so, deselect and you can write normally.

Some users are prevented by all kinds of green and red underscores, which are caused due to the operation of the automatic spell-checking service in the text. In this case, two options:

The first is to separately review all corrections and agree / reject them. It is done as follows:

  • Right-click on a single word (or any word in the underlined phrase) under which there is underscore, after, select one of the correction items.
  • If you think that the correction options are incorrect or the program mistakenly considers the word incorrect, just click "Add to Dictionary " or "Skip ».

Or you can just turn off the automatic spelling function, done as follows:

1. Click on the “Word "Or the"File »In the upper left corner (depending on the version of the program used).

2. Select “Options ».

3. Click on “Spelling ».

4. Uncheck the boxes indicated on the screen.

After that, the utility will not automatically check the spelling of the text and, accordingly, you will not see any green or red underscores.

Additional ways to remove underline you can.

format font tam vibaew poslki dlku i mesta hernogo cveta vibiraew krasnuju

tools -> language -> set language and choose the language to check on
or just checking for F7

He used to do this ..

With a brew of chamomile, wipe the face.
Or use all sorts of special creams, they are also full.

Ointment. Boro Plus at the pharmacy.

It is appropriate.
“Like” is stylistically incorrect.

Spots and scars after acne

Acne on the face itself is a very unpleasant phenomenon, but even more unpleasant to find that after the disappearance of acne on the face there were noticeable traces in the form of red spots or spider veins. In the fight against them, tried and tested folk remedies will help you, which we offer you.

Stains and scars after acne - let's find out what methods will help remove traces, get rid of red spots and scars after acne.
Acne Spot Masks

A wonderful effect, absorbing spots and scars after acne, has a clay mask. To get rid of red spots and scars after spun, take ½ tbsp. tablespoons of green clay and dilute it with a small amount of cold water to a creamy state (without lumps). Add 3-4 drops of rosemary essential oil to the clay mass and apply the mixture to problem areas where there are spots or traces of acne for 10 minutes. Remember to moisturize your skin. Course - 4 masks every other day, if necessary, repeat after two weeks.

To remove red spots after acne, you can also use a mask based on white clay: ½ tbsp. a spoonful of clay is diluted with water as described above and mixed with 2 teaspoons of lemon juice. The mask is applied to the spots and kept for about 15 minutes.

And here is another, very pleasant recipe to get rid of spots after acne - a honey-cinnamon mask. 1 teaspoon of honey is thoroughly triturated with 1 teaspoon of cinnamon, and then smeared with acne on the resulting mass and left for 20 minutes.
How to get rid of spots and scars after acne

Cucumber juice is famous for its excellent whitening properties, which you can use in almost any form: for example, put cucumber rings on problem areas, or you can grind the cucumber on a grater and apply on your face in this form for 20 minutes.

Essential oils to remove acne marks can be used independently. Например, помогают избавиться от красных пятен после прыщей поочередное протирание пораженных прыщами участков кожи маслом розмарина и чайного дерева, несколько раз на протяжении дня. Можете использовать и смесь из масел чайного дерева, авокадо, лаванды и сока лимона (все ингредиенты берутся в равных долях), рубцы после прыщей в этом случае быстро проходят.However, do not abuse essential oils, as in large quantities they can have too much effect on the nervous system and even provoke an increase in pressure, the amount should be minimal, only to slightly lubricate the spots after acne.

A parsley broth will help remove red spots after acne. Cook it, cool, and then fill it in ice molds and put in the freezer. With these cubes, it is useful to wipe the marks after acne in the morning and in the evening.

Alternative medicine also recommends using St. John's wort tincture to get rid of traces and scars after acne: they take one glass of alcohol for two tablespoons of St. John's wort, put closed dishes in a dark, cool place and leave for ten days. Ready infusion is used daily, applying to the traces left after acne.

Apple cider vinegar is no less effective, but not in concentrated but diluted form with water (1 part vinegar in 3 parts water). Clean your skin with daily vinegar cleansers in the morning and acne marks will soon disappear. To remove old or numerous marks and scars after acne, do this: soak a soft cloth in the solution and apply it on your face for five minutes.

However, remember that with some vascular diseases, folk remedies for stain removal may be contraindicated, so before proceeding with the above procedures for removing acne marks, consult your doctor.

Enable change tracking using the method below that applies to your version of Microsoft Word.

  • Press Ctrl + Shift + e. This is a keyboard shortcut that works in all versions of Microsoft Word.
  • Go to the status bar and click on the "Track Changes: Off" button to change the status to On. You may need to right-click on the status bar to see the change tracking option. This method works in Word 2007 and Word 2010.
  • Go to the "Tools" and then "Track Changes" section to activate the change tracking function in version 2002 or 2003.
  • Follow the command sequence: "Tools," "Track Changes," and then "Highlight Changes" when using Word 2000 or earlier. After that, you can check the box next to "Track Changes While Editing" to activate the red underline feature.

Use the following methods to view the underlined parts of a document.

  • Use the menu in the Tracking group on the Overview tab if you have Word version 2007 or 2010. You can compare "Original: Show Markup" with "Final: Show Markup" to see how they differ.
  • View your changes in the pop-up window by selecting "Final with Markup" or "Original with Markup" in Word 2002 or Word 2003. The results of your choice will appear in a small pop-up window along with the document where the changes were made.
  • Check "Highlight Changes on Screen" if using Word 2000 or earlier. To access this feature, go to "Tools", then "Track Changes."

Control how you want your changes to be displayed using the method that applies to your versions of Microsoft Word.

  • Select one of the proposed options for changes to "Track Changes" found in the "Options" submenu in "Tools." This method is for versions 2003 and earlier.
  • Select "Track Changes Options" on the "Review" tab if using version 2007 or 2010 Word. Here you can choose what changes you want to display in the document.
  • Find out who made these changes if more than one author is working on a document. This is especially useful if you want to provide feedback to different authors regarding the same document and can be done differently depending on the software version.
  • Hover over an area that has been underlined with a red line. A pop-up box will appear showing the name of the author who made the changes to the Word document.
  • Click the “Reviewing Pane” button on the review toolbar if you are using Word 2002 or Word 2003. The panel will be displayed at the bottom of the screen, which will show the author’s name next to each change that has been made. If you are using version 2007 or 2010, a panel will appear on the left side of the screen.

Microsoft Word is a handy tool for creating text files. Program options allow you to beautifully and competently draw up documents for official, business or personal correspondence. Sometimes some editor functions cause slight irritation. Let's look at how to remove the red underline of the text in Word, and consider situations where it is really needed.

Why does Word highlight individual words with wavy lines?

In a text editor from Microsoft, spell checking and punctuation are enabled by default. Fragments containing spelling errors are underlined in red, punctuation in green. The built-in dictionary of the program cannot accommodate the full range of existing words in the Russian (or any other) language. Therefore, single words Word mercilessly underlines with red lines, considering their spelling erroneous. This is especially true of the names of people, names of firms and enterprises, professional terminology and slang expressions.

If commas are missing in the text, the syntax of words is broken, then Word will highlight such sentences with a wavy line in green. In most cases, this function is very useful, as it avoids grammatical errors and random descriptions in the created document. But there are times when there is no other way out than to remove the red underline in Word in order to give the text an aesthetic appearance.

Types of documents in which multi-colored underlining is inappropriate

In files for personal or corporate use, these bright lines can be ignored. But imagine that the text file is intended for demonstration on the screen. This can be a list of company employees, a table with the names of school students, a report on the work of the enterprise, and many other options.

It will seem strange to an uninitiated person why certain words are underlined in red. Or, for example, it is planned to take a screenshot from the created text document with the further insertion of the picture into the presentation, for posting on the website or sending by e-mail. Therefore, the question of how to remove the red underlining in the Word is by no means an idle one that requires an immediate solution.

Get rid of unnecessary lines in a few clicks

Let's look at a few ways to remove the red underline in Word for a single document.

Right-click on the word and select “Skip” or “Skip All” in the menu that appears. In the first case, the underline will disappear under only one word, in the second - all text will be cleared of lines. This option is not the most reliable, because the next time you open the file, wavy lines may appear again.

Open the menu for the underlined word and select "add to dictionary". Now, in any text document created on your computer, this word will be considered spelled correctly. However, when you change the case in Word, it will highlight it again, noticing an error.

In the upper left corner of the open text editor, click on the “file” button, then “parameters”, then “spelling”. Here, uncheck the box "automatically check spelling."

In this case, the literacy test will not be carried out in all documents, there will no longer be a problem with how to remove the red underline in Word. In Microsoft Word version 2010 and higher, it is possible to disable validation only for the current version of text.

To open the file in the same form on other computers or laptops, do not forget to enable protection against editing. To do this, in Microsoft Office 2003 or 2007, select “Prepare” in the main menu, then “Mark the document as final,” in Word 2010, click on the icon with a lock and mark the desired protection option.

This article will tell you how to enable the spell check feature in Word.

Many users are wondering why in the text editor “Word »Misspelled words are not underlined in red, and how to fix this error? Consider these issues in our review today.

How can I make words with errors automatically highlighted in the Word 2007/2010/2013/2016 program?

As you know, in the text editor "Word »Words containing spelling errors are highlighted by a red wavy line. Thus, we immediately notice that we are sealed, and the error needs to be fixed. But for some users this feature does not work. Let's try to solve this problem.

  • Run the program "Word "Go to"File ", Further - in"Options ", Then - in"Spelling "(In different versions of"Word »Some items will vary slightly in name). Next, put the daws, as shown in the screenshot and click on "OK ».

Turn on the spell-check feature in the Word program

Turn on the spell-check feature in the Word program

Turn on the spell-check feature in the Word program

  • It will also be useful for you to do the following. In an open document "Word »Bottom left, right-click on the icon of an open book with a pen. Then, in the menu that opens, check if the daw is opposite the "Spell check ". If not, then put it.

Turn on the spell-check feature in the Word program

Turn on the spell-check feature in the Word program

  • In addition, it does not hurt to check which language is set in the settings. If it is English, then spell checking will not work. The bottom left of the document “Word »Left-click as shown in the screenshot. Then in the window that opens, assign the Russian language and click on "OK ».

Turn on the spell-check feature in the Word program

Turn on the spell-check feature in the Word program

Video: Word spell checker not working

Word text editor has a large number of built-in tools that simplify working with text documents. For example, Word can check typed text for grammar and spelling errors. Found errors are underlined in red and the user is offered correction options. But, in some cases, such an emphasis is more distracting from work than it helps. For example, if the text contains a large number of technical terms, then it will simply be filled with red underscores.

If you encounter such a problem, then we offer you three methods at once, how you can remove the red underline from a Word document. These methods are illustrated by the example of Word 2016, but they should also work in Word 2013, 2010 and 2007.

Method number 1. Choosing the right language to check for errors.

As we said, red underscores indicate errors in the text. But, there may be a situation where there are no errors, but Word is trying to check the text according to the rules of another language and this leads to the fact that the text is underlined by a red line. In this case, you can remove the red underscores by simply telling Word the language in which to check for errors.

In order to change the test language, you need to select the text underlined with a red line (or the entire text of the document), and click on the language name, which is located at the bottom of the Word program window.

As a result, a small window will appear where you can specify the language for the selected text fragment.

After you specify the correct language, the red underscore will disappear.

Method number 2. Adding a word to the dictionary or skipping errors.

In some cases, Word may underline red words with unknown words. If you want to remove such underlining, then this can be done in two ways, you can add a word to the dictionary or simply skip this error. To do this, right-click on the underlined word and open the "Spelling" menu.

Two options will be available here: Add to Dictionary and Skip All. If you select the first option, the word will be added to the dictionary and after that it will no longer be underlined by the red line as erroneous, and if you select the second option, the Word will simply skip this error.

Method number 3. Disable full text check for errors.

If you do not need to check the text for errors, then you can completely turn off the red underline in Word. To do this, click on the "File" button and go to the "Options - Spelling" section. Many settings are available here that allow you to disable the checks that Word performs.

For example, you can disable spelling and grammar errors during typing. In this case, spelling and grammar checking will be disabled for all documents.

At the bottom of the options list is an exception block that only works for this file.

Using these exceptions, you can remove the red underline only for the current Word document.

How to remove underline in Word: formatting setting

Underline occurs after copying text from other sources (files or websites), in some cases the program automatically sets it. An example is hyperlinks. By default, the application, having determined that the fragment is the path to the external resource, repaints it blue, underlines it and affixes a link.

If there is a line under the word, the easiest way to delete it is to change the text style. You can do this using the tab tool "Home" , which visually represents a button with the letter "H". In the English version of the program, the “U” button corresponds to this function.

Here is the sequence of actions that will lead to the desired result:

  • select text
  • on the "Home" tab, make the "H" button inactive by clicking on it with the mouse.

Advanced users know how to remove underline in Word in a quick way, and use the keys to remove it.

Special underscores

The built-in option for checking the correct spelling and punctuation marks marks fragments with errors with lines of different colors. A red wavy line means that the word is spelled incorrectly (or it is not present in the Word dictionary), a green wavy line - punctuation is required.

There are three ways to remove red underscores in Word.

  1. Check the spelling of the word and correct it if a typo was made during typing.
  2. Hover over a word, press the right mouse button and select one of the options offered by the program in the context menu.
  3. Refuse to correct. To do this, also hover over the word, press the right button and select “Skip” or “Add to Dictionary” from the menu. The word included by the user in the dictionary will not subsequently be considered an error.

When spelling checking, you need to pay attention to the language of the document. For example, in a Russian text, the program may take English words for spelling.

How to remove the green underline in Word? Answer: use the methods described above. The difference is that the application detected a grammar error.

Program settings

A cardinal way to get rid of colored wavy lines is to turn off text auto-checking. This operation is performed through the program settings window. In version 2007 - click on the Office logo, in new versions - go to the "File" menu. Next, on the "Spelling" tab, uncheck the "Hide errors" fields.

So, now the question of how to remove the underline in Word will no longer disturb the user. Auto repair is disabled. But there is a minus - you have to manually look for errors in the document.

How to remove underline in Word? If you asked this question, then something is wrong with your text. The fact is that in this way the program indicates some imperfections of the material written in the document. What exactly flaws to look for and what to do if, in fact, everything is in order with the text?

How to remove red underscores in Word?

This is the easiest question. colors, everyone who works with the program is not the first day. Red in this text editor is the most common marker. It indicates that there is some kind of error. More precisely, not some, but one of these:

  • the underlined word is not in the dictionary,
  • the word is spelled
  • Word Red also underlines repetition.

If you do not understand what kind of error is in this part of the text, right-click on it. A built-in spell checker helps you figure it out.

It is worth noting that errors can also be highlighted in green. This indicates problems with the use of punctuation marks, inconsistencies, stylistic mistakes and more.

There are two options for dealing with underlining red or green:

  1. To remove this underline, just fix the errors.
  2. You can also click on “Skip” so that the scan program stops “seeing” this section.

How to remove blue underscores in Word?

How to remove the underline in Word blue, not everyone knows. This color can not be found in all versions of a text editor. If the text in front of you is drawn by a blue wavy line, it has formatting problems.

As with other errors, this can be removed in one of two ways:

  1. Fix it. Если вы не понимаете, в чем ошибка, нажмите на проблемный участок правой кнопкой мыши.
  2. Как и прочие ошибки, эту тоже можно пропустить, нажав на соответствующую кнопку.

Как убрать подчеркивания ссылок в Word?

Как убрать подчеркивание в Word, если речь идет о линии под ссылками? Конечно, довольно редко возникают ситуации, когда это может понадобиться. Но если уж мы начали разбирать вопрос ненужных подчеркиваний, стоит затронуть и этот тип.

  1. Выделить текст, под которым нужно убрать подчеркивание, после чего нажать сочетание клавиш Ctrl+U.
  2. Также можно пойти более долгим путем: выделить текст, найти в верхнем поле программы во вкладке «Главная» букву «Ч», подчеркнутую снизу. После нажатия на нее линия под выделенным текстом пропадет.

In the section on the question, Word underlines in red almost the entire text, how to remove all the red lines set by the author at once Flush the best answer is Listen. It is necessary to select all the text, for example, through the Edit menu - Select all or simply by pressing Ctrl + F. Then, carefully so that the selection does not fail, you find the section Service - Language - Select Language in the menu. A window will open in which there will be a table with the names of languages ​​in the upper part, and in the bottom two lines with squares on the left.
1 line - Do not check spelling.
You need to put a check in this box, and then save the changes, for example, by pressing Ctrl + S / S or through the menu - File - Save.
Or you can also at the top of the Language window - select a language, specify any language for which there is no dictionary and which Word will not check for sure. For example, Albanian)) and save. Now, the language setting will be saved in this file, in which the word test will not be done. The task is completed, the goal is achieved.
Superfood Brain
Sage
(12802)
The dumbest comment. What for comment so?
Or did you fail to read the question?
So read it again, ten more times, maybe you’ll understand, Albanian nerd.

Answer from Clearing [guru]
What confuses underlining? You can remove the red lines only in your Word, and another's Word will emphasize everything again.

Answer from Irina Robertovna Makhrakova [guru]
This sometimes happens when switching from English to Russian. Try switching to Russian twice twice in a row - this method once worked pretty well for me.

Answer from Give advice [guru]
1. Choose Russian for the text, if you want to save word wraps along the edge of the page, as in a book - through a hyphen.
or
2. Select Language - No check if word wrap is enough.

Answer from Yotas Marchenko [newbie]
This sometimes happens when switching from English to Russian.

Answer from (NE PLAST) [active]
Service-options-flagging fixes: inserts (none)

Answer from BaTaR kUnNiN aTaR TaNi BaR. [newbie]
Very simple. Word. Up Reviewing. Choose a language. There is a globe, the book is underlined. Do not check spelling.

Answer from Vitaly Lyaskovsky [newbie]
Learning to write correctly) it's simple!

Answer from Yorgey Pryadko [newbie]
For microsf word 10
1. left-click on the text so that the cursor blinks
2. Then simultaneously press Ctrl + A
3. Then (carefully so that the selection is not lost), select the "Review" in the upper tab
4. find the "Language" button with the down arrow
5. click on the arrow and select "Spell-checker language" in the drop-down menu
6. The "Language" window opens with the inscription "mark selected text as"
7. If the document was created in Ukrainian and you write in Russian, then simply change the selected text to Russian and vice versa
P.S. If you still want to emphasize the text, try contacting the school so that you are taught spelling there, maybe it's just your illiteracy!

Enable change tracking using the method below that applies to your version of Microsoft Word.

  • Press Ctrl + Shift + e. This is a keyboard shortcut that works in all versions of Microsoft Word.
  • Go to the status bar and click on the "Track Changes: Off" button to change the status to On. You may need to right-click on the status bar to see the change tracking option. This method works in Word 2007 and Word 2010.
  • Go to the "Tools" and then "Track Changes" section to activate the change tracking function in version 2002 or 2003.
  • Follow the command sequence: "Tools," "Track Changes," and then "Highlight Changes" when using Word 2000 or earlier. After that, you can check the box next to "Track Changes While Editing" to activate the red underline feature.

Use the following methods to view the underlined parts of a document.

  • Use the menu in the Tracking group on the Overview tab if you have Word version 2007 or 2010. You can compare "Original: Show Markup" with "Final: Show Markup" to see how they differ.
  • View your changes in the pop-up window by selecting "Final with Markup" or "Original with Markup" in Word 2002 or Word 2003. The results of your choice will appear in a small pop-up window along with the document where the changes were made.
  • Check "Highlight Changes on Screen" if using Word 2000 or earlier. To access this feature, go to "Tools", then "Track Changes."

Control how you want your changes to be displayed using the method that applies to your versions of Microsoft Word.

  • Select one of the proposed options for changes to "Track Changes" found in the "Options" submenu in "Tools." This method is for versions 2003 and earlier.
  • Select "Track Changes Options" on the "Review" tab if using version 2007 or 2010 Word. Here you can choose what changes you want to display in the document.
  • Find out who made these changes if more than one author is working on a document. This is especially useful if you want to provide feedback to different authors regarding the same document and can be done differently depending on the software version.
  • Hover over an area that has been underlined with a red line. A pop-up box will appear showing the name of the author who made the changes to the Word document.
  • Click the “Reviewing Pane” button on the review toolbar if you are using Word 2002 or Word 2003. The panel will be displayed at the bottom of the screen, which will show the author’s name next to each change that has been made. If you are using version 2007 or 2010, a panel will appear on the left side of the screen.

format font tam vibaew poslki dlku i mesta hernogo cveta vibiraew krasnuju

tools -> language -> set language and choose the language to check on
or just checking for F7

He used to do this ..

With a brew of chamomile, wipe the face.
Or use all sorts of special creams, they are also full.

Ointment. Boro Plus at the pharmacy.

It is appropriate.
“Like” is stylistically incorrect.

Spots and scars after acne

Acne on the face itself is a very unpleasant phenomenon, but even more unpleasant to find that after the disappearance of acne on the face there were noticeable traces in the form of red spots or spider veins. In the fight against them, tried and tested folk remedies will help you, which we offer you.

Stains and scars after acne - let's find out what methods will help remove traces, get rid of red spots and scars after acne.
Acne Spot Masks

A wonderful effect, absorbing spots and scars after acne, has a clay mask. To get rid of red spots and scars after spun, take ½ tbsp. tablespoons of green clay and dilute it with a small amount of cold water to a creamy state (without lumps). Add 3-4 drops of rosemary essential oil to the clay mass and apply the mixture to problem areas where there are spots or traces of acne for 10 minutes. Remember to moisturize your skin. Course - 4 masks every other day, if necessary, repeat after two weeks.

To remove red spots after acne, you can also use a mask based on white clay: ½ tbsp. a spoonful of clay is diluted with water as described above and mixed with 2 teaspoons of lemon juice. The mask is applied to the spots and kept for about 15 minutes.

And here is another, very pleasant recipe to get rid of spots after acne - a honey-cinnamon mask. 1 teaspoon of honey is thoroughly triturated with 1 teaspoon of cinnamon, and then smeared with acne on the resulting mass and left for 20 minutes.
How to get rid of spots and scars after acne

Cucumber juice is famous for its excellent whitening properties, which you can use in almost any form: for example, put cucumber rings on problem areas, or you can grind the cucumber on a grater and apply on your face in this form for 20 minutes.

Essential oils to remove acne marks can be used independently. For example, they help get rid of red spots after acne by alternately rubbing acne-affected areas of the skin with rosemary and tea tree oil, several times during the day. You can also use a mixture of tea tree oils, avocado, lavender and lemon juice (all ingredients are taken in equal proportions), the acne scars quickly pass in this case. However, do not abuse essential oils, as in large quantities they can have too much effect on the nervous system and even provoke an increase in pressure, the amount should be minimal, only to slightly lubricate the spots after acne.

A parsley broth will help remove red spots after acne. Cook it, cool, and then fill it in ice molds and put in the freezer. With these cubes, it is useful to wipe the marks after acne in the morning and in the evening.

Alternative medicine also recommends using St. John's wort tincture to get rid of traces and scars after acne: they take one glass of alcohol for two tablespoons of St. John's wort, put closed dishes in a dark, cool place and leave for ten days. Ready infusion is used daily, applying to the traces left after acne.

Apple cider vinegar is no less effective, however

Reason 1. The author of the text intentionally replaced, say, the Russian letters “o” with the Latin “o” in the text.

(that is, those letters that have the same spelling in Cyrillic and Latin - “o”, “a”, “e”, etc.). This is done, for example, in order to protect against copying text. Such a replacement can be checked by selecting all the text and changing the font, which does not support the Cyrillic alphabet - in this case, all Russian characters will remain unchanged, and the Latin ones will change. An indirect sign of the replacement of letters may be that not all words are underlined in red, some are not underlined, because they do not have letters that have been replaced (no "o", "a", "e").

What to do?

Having determined that some letters from the Cyrillic alphabet in the Latin alphabet are replaced in the text, you need to search and replace all the letters.

Push the keyboard combination CTRL +H - To find - we write the Latin letter in the Latin layout (in our case "a") - Replaced by - write the Russian letter in the Russian layout (in our case, “a”) - Replace all (if in the text of fragments in the Latin layout) or Find further and Replace (to find each case of a character replacement and replace manually).

How to remove the underline in red of all words?

Select the entire text of the file with a keyboard combination CTRL +A or on the toolbar Home - Select - Select All .

In the most popular text editor MS Word there are built-in tools for checking spelling. So, if AutoCorrect is enabled, some errors and typos will be corrected automatically. If the program detects an error in a particular word, or even does not know it at all, it underlines this word (words, phrases) with a red wavy line.

Note: Word also underscores words written in a language other than the language of the spell checkers.

As you understand, all of these underscores in the document are needed in order to indicate to the user the committed oprographic and grammatical errors, and in many cases this helps a lot. However, as mentioned above, the program also emphasizes unknown words. If you do not want to see these “pointers” in the document with which you are working, you will probably be interested in our instruction on how to remove the underlining of errors in Word.

1. Open the menu "File" by clicking on the far left button at the top of the control panel in Word 2012 - 2016, or by clicking on the button “MS Office” if you are using an earlier version of the program.

2. Open the section "Options" (previously “Word Options” ).

3. Select the section in the window that opens "Spelling" .

4. Find the section “File Exception” and check there opposite two points “Hide ... errors in this document only” .

5. After you close the window "Options" , you will no longer see intrusive red underscores in this text document.

Pin
Send
Share
Send
Send