Useful Tips

DIY clay making and sculpting


Plastic clay (aka polymer) is a material that is used to create various crafts. If you learn how to work with this material correctly, you will be able to create beautiful decor elements. It is not necessary to buy a ready-made substance for modeling, because you can make it yourself. In our article, we will tell you how to make polymer clay at home and describe the process of sculpting from manufactured material.

Clay in its qualities can resemble the plasticine from which we made animals. Polymer clay is based on special constituents that make the finished material soft and plastic. Dyes are also added in the manufacture, due to which the desired color of the material is obtained.

The base made is suitable for various crafts, for example, from polymer clay, you can make a beautiful doll for your home collection.

Corn Starch Polymer Clay

Many people think that making this material for sculpting on their own will not work, it is not. How to make polymer clay at home, will tell just below, and now we will list what is necessary for the manufacture of:

  • 15 g of oily cosmetic cream,
  • lemon juice a few spoons
  • PVA
  • a pack of corn starch,
  • microwave is also required,
  • glass container resistant to temperature influences,
  • cling film or bag,
  • plastic spatula.

Now we’ll tell you, as promised, how to make polymer clay at home. We work according to the following steps:

  1. The first thing to pour is corn powder. Pour in PVA and add cream. Mix the ingredients pour in the juice. Once again, mix well with a blender or mixer. After mixing, a mass without lumps should be in front of you. We put it on the microwave for half a minute. The heating temperature should be maximum.
  2. After the end of the time, we take out the composition from the microwave, mix the mixture, and let it cool down also for half a minute. If a film appears on the surface during heating, it must be carefully removed.
  3. Next, grease with cream or petroleum jelly, the surface of the table and spread the mixture. A well-kneading composition, just as is done with the dough. Kneading time is about five minutes.

Everything is ready. If necessary, the finished substance can be painted in any suitable color. For this, diverse paints are used.

Now you know how to make polymer clay at home. The manufacturing process is not so complicated, but takes only ten minutes of your time.

Potato Starch Recipe

There is another popular recipe, it has differences in the ingredients, but the manufacturing process is almost identical to the first option. The preparation of this recipe is based on cooking and heat treatment with steam. For work, we need:

  • PVA
  • half a package of potato starch,
  • a spoon of petroleum jelly or fat cream,
  • two small spoons of liquid baby soap,
  • iron capacity.

How to make polymer clay at home, which includes potato starch:

Potato Starch Recipe (Step 1)

    Pour into previously prepared container, starch, pour PVA. Add cosmetic greasy cream (can be replaced with odorless petroleum jelly). Pour in baby soap. The consistency is placed in a water bath and cook.

(Step 2) The installed container above the water bath must be constantly mixed. And when the composition begins to turn into lumps, it must be removed from the fire, and as quickly as possible to move the contents into the container smeared with cream. At the same time, it is important not to stop interfering.

(Step 3)

  • If the mixture is not overexposed, then you can apply it by hand. Since the composition is not very hot. At the end, you need to determine the readiness of polymer clay. Roll up the ball, if it does not show flaws, the cooking process is over. The mixture now needs to be wrapped with polyethylene and let it brew for 12 hours.
  • Further, we recommend reading the instructions on how to sculpt polymer clay and do wonderful things. For example, this recipe produces clay, which can become the basis for sculpting decorative flowers.

    Fabrication without heat treatment

    Many are interested in how to make polymer clay at home without temperature treatments. This question is relevant, since heating in a water bath or in a microwave is uncomfortable for many, and safety procedures must be followed during the process. The recipe for the preparation of polymer clay with a cold version, practically does not differ in the manufacturing technology of the composition, but has a difference in some ingredients.

    To prepare such a recipe, you must have:

    • corn starch one pack,
    • PVA
    • one tablespoon of petroleum jelly,
    • two large spoons of petroleum jelly (or replace with hand cream)
    • 20 grams of perfume.

    Having collected all the components, you can begin to manufacture. By the way, in this case, you can attract your child, it is quite safe, as is the modeling itself.

    Fabrication without heat treatment (Step 1)

      Pour glue into the selected dishes, add vaseline oil to it and, if desired, perfume. Mix the composition.

    (Step 2) Next, add a little starch and mix the material. In the process of mixing add corn powder. Mix thoroughly. Add a fat cream (if it is not there, replace it with petroleum jelly).

    (Step 3)

  • Mix everything and pour out the rest of the starch. Now mix thoroughly. You can add watercolor paint and get the desired color.
  • So you learned how to make polymer clay at home and you don’t need to heat and cook anything. To make sure that unusual things can be made from the fabricated material, we recommend that you study the material on how to sculpt polymer clay crafts.

    Reasons for low-quality crafts

    How to make polymer clay at home, we figured out, but often in the process of molding from this material, finished products quickly deteriorate. In this case, everyone sins on the wrong recipe for the preparation of the material, but in reality this is not so. Such qualities are influenced by many factors, including errors that were made in the design of the figures.

    Incorrect timing

    This factor contributes to the violation of the properties of the manufactured material. As everyone knows, in the process of baking a product in the oven, plasticizers come out of the main composition, and thus the clay craft becomes solid. If the material is not baked, tenacity will be weak and the finished craft will begin to break. Therefore, experts recommend each layer of clay to bake for 20 minutes, so the entire plasticizer will evaporate from the material and the product will become strong. If the time is not so, the finished product will be fragile and will quickly break.

    Wrong temperature selection

    Craft from polymer clay, which is baked at the wrong temperature, after fragility becomes brittle. Experts recommend in this process to observe the exact temperature regime of baking.

    Also note that most kitchen stoves with ovens have a thermometer installed, which has an error in the readings. Basically, the readings vary by 10-20 degrees. Of course, for the preparation of delicious dishes, these indicators are not critical, but here for clay crafts these indicators will carry a large error.

    Experts recommend using a special thermometer. Its readings will be more accurate, it is important for finished products.

    It is also recommended that after baking, allow the product to cool on its own. Do not take the craft out or pour cold water on it.

    Observing such rules for the manufacture of crafts made of polymer clay, all items will be of high quality.

    Processing Disorders

    Often, finished crafts after heat treatment begin to break. Many in this case, sin on poor-quality basic material. Of course, the cause of the breakdown may be another oversight, but still errors were made during processing.

    When processing the material, do not brute force the product and you will succeed.

    Improper storage

    The last reason affecting the quality of finished products made of polymer clay is considered improper storage conditions of the material. It is not necessary to store the prepared polymer clay in the sun, it is also not recommended to store the manufactured things in the sun. During such storage, the ingredient that is responsible for the adhesion of the material evaporates.

    Proper clay storage

    It is advisable to store the finished substance in an airtight container that will be refrigerated. As such an item, you can use plastic pans or plastic bags. But do not completely close the container, in the closed state, the clay can dry, unless of course, it is applied immediately after manufacture.

    If the polymer clay and the craft itself were made in compliance with all the requirements, it can be used without fear that it will break. Such a product is able to withstand falling on the floor and will serve you for a long time.

    As you have seen, it is not at all difficult to make polymer clay at home, in principle, how to sculpt different crafts from it. The main thing when manufacturing to comply with all requirements.

    DIY polymer clay making (using potato starch)

    The polymeric material is convenient to use, and it is not difficult to prepare it yourself from potato starch.


    1. PVA construction glue (about half a cup)
    2. Potato starch (a glass of two hundred grams)
    3. Lemon juice (one dessert spoon)
    4. Softening baby oil (about 50 ml.)

    First you need to mix construction glue and starch in a pan or other utensils, gradually add juice and oil. Put the pan on a small fire and, warming up, mix until a mass similar in consistency with mashed potatoes is obtained. After this, the pan should be removed from the stove, add a little more oil, remove the finished mass and knead it. The polymer mass for crafts is ready, it must be wrapped in a film, allowed to cool. Remove the cooled mass to the refrigerator.

    The recipe for polymer material is simple and accessible to everyone.


    1. The quality of PVA glue should be high. Poor quality construction will lead to the fact that the material will be unplastic.
    2. If the glue is thick, you should slightly reduce the amount of starch.

    Gallery: clay modeling (25 photos)

    Making clay dough with your own hands (from natural clay) and sculpting from it

    Clay mined independently in a quarry requires special preparation. The recipe for clay kneading with your own hands is somewhat more complicated.

    Making clay for modeling.

    First you need to divide the common layer into small pieces and fill with water. The pouring water must be warm. The clay mass will swell, after which it must be laid out on a thick cloth. The fabric should completely absorb excess water. In the process of waiting, it is necessary from time to time to crush and turn the mass over with hands greased with cream. Particular attention should be paid to the absence of unnecessary impurities in the material (stones, too large sand, etc.).

    After kneading, clay must be discarded.. Divide the clay dough into layers and hit them with your hand to remove air. If the mass is liquid, it will require additional drying time. Self-made clay is ready. It is stored in a cool place, wrapped in a damp cloth and bag.

    From this test you can sculpt dishes, toys, whistles and other crafts. The product, made by yourself, must be dried and “baked” in the oven. Also, products can be painted and varnished.

    Do-it-yourself kneading of clay for sculpting clay powder products

    Knead clay in advance, about a week two before the expected day of sculpting. For a better work result, the material should be aged. To prepare the dough, clay powder is poured with warm water, mixed into a plastic mass. Wrap the clay dough in a bag or film, put in the refrigerator for storage.

    Preparation of self-hardening white clay from soda and corn starch, modeling.

    To make white clay you will need an almost complete pack of soda (food) and a cup of corn starch. Starch and soda are mixed in the pan, a little water is added, about half a cup, and all this is put on a small fire. The mass should be stirred all the time to avoid sticking to the bottom of the dishes. If desired, you can add a few drops of essential oil with a pleasant aroma, so the composition will be flavored. When the mass in the pan will look like mashed potatoes, it can be transferred to a plate, covered with a damp cloth and wait for cooling. After cooling, the material must be thoroughly wrinkled. For the convenience of work, hands can be greased with cream. To avoid solidification, it is necessary to store the clay in an airtight bag or film.

    To make toys, clay is rolled into a layer from which figures can be cut out (for example, with cookie cutters). You can also sculpt cups, candlesticks, and decorative plates from the mass. The products themselves will dry, firing in the oven or oven is not required. Finished crafts can be polished, painted better with acrylic paints), varnished. It turns out an excellent sculptural composition.


    It is possible that the first time clay for modeling will be imperfect. There is nothing wrong with this, since mastery will come with experience. Most importantly, do not despair and do not give up half the way. Over time, clay will turn out better and better, and the process of creating toys, crafts, and jewelry will bring true pleasure.

    Possible options

    There are a lot of recipes for the preparation of polymer clay, or rather its analogue in properties. All of them can be divided into the following categories:

    • On corn starch.
    • Based on potato starch.
    • With petroleum jelly and without it.
    • With heating in the microwave.
    • Heated in a water bath.
    • With the cooking process on the stove.
    • The cold way.

    As you can see, the options differ in manufacturing technology, the materials used and their percentage.

    Simple ingredients: glue and corn starch

    Obtained according to this recipe, the mass will almost completely correspond in its properties to the purchased polymer clay. The only drawback of this composition is that the work done from it will decrease by about 30% after drying by weight and size, respectively. Pay attention to this minus and note that the products need to be performed a little larger than you would like to see the finished version. Craft from this composition should dry for at least a day.

    If you do not know how to make polymer clay at home, start with this recipe, since the necessary components are cheap and affordable. You will need the following:

    • 1 cup cornstarch.
    • 3/4 cup of construction PVA (can be bought at the store) or children's (clay consistency is softer with it).
    • 2 tbsp. l mineral oil (motor) or baby.
    • 1 tbsp. l lemon juice.
    • Heat-resistant container for mixing with non-stick coating.
    • Spatula or stirring spoon.
    • Stand for hot container.
    • Gloves.

    How to make corn starch mass

    The sequence of actions is as follows:

    • Mix the right amount of corn starch and glue in a heat-resistant container at room temperature (until heated). The proportions of the ingredients can be increased or decreased as a percentage.
    • Mix the resulting composition well until smooth.
    • Add prepared mineral oil and lemon juice.
    • Stir until smooth.
    • Place the container on the stove and heat, stirring constantly, until a puree-like consistency is obtained.
    • Remove the container to the stand.
    • It’s better to add some more mineral oil.
    • Put the mass on the table (preferably covered with something heat-resistant). You can use a tray or chopping board.
    • While the mass is still hot, put on gloves and knead it properly to a uniform consistency, like a pizza dough.

    Now you know how to make polymer clay at home based on simple ingredients. It is worth noting that the resulting mass only repeats the properties of polymer clay, but is a more natural product, and not a composition prepared on the basis of plastics, as in the case of a purchased option.

    Microwave Glycerin Recipe

    The first method examined taught you how to make polymer clay at home without petroleum jelly, however, adding this ingredient softens the texture, making the composition more plastic. When dried, an article made of such a material does not exactly crack during shrinkage. The modeling mass is quite sticky, not only due to glycerol, but also to a larger proportion of glue, so it’s better to cook it a day before the start of the creative process, and better - in a few days. The following components will be required:

    • 1 cup of glue.
    • 1 cup cornstarch.
    • 1 tbsp. l petroleum jelly.
    • 2 tbsp. l lemon juice.
    • 1 tbsp. l non-greasy and silicone-free hand cream.
    • The tools are the same as in the previous method.

    How to make polymer clay in the microwave

    The steps are as follows:

    • В термостойкой миске тщательно перемешайте клей, кукурузный крахмал и вазелин до однородной массы.
    • Добавьте лимонный сок и как следует размешайте.
    • Put the container in the microwave with maximum power for 30 seconds.
    • Stir the mass.
    • Hold for another 30 seconds in the same mode.
    • Remove the bowl from the oven.
    • Lubricate the work surface with a hand cream (board, tray, table), on which you will knead the mass.

    • Remove the dried crust formed in the oven from the mass and discard.
    • Take the plastic component and lay it on the work surface.
    • Vigorously and thoroughly knead the mass like a dough. It should become ductile and elastic.
    • Make a sausage out of the mass and lay on the cloth. It must absorb excess moisture.
    • Completely cooled mass can be removed for storage.

    Do you have potato starch? Consider how to make polymer clay at home

    Photos of the stages of work clearly demonstrate that creating mass for sculpting at home is a simple matter. The problem may be that in your arsenal there are no suitable ingredients and devices. You can completely do without a microwave oven using methods with heating on a conventional gas stove, but not everyone has corn starch. If you are faced with such a problem, and you are thinking about how to make polymer clay at home without starch, as an alternative, take a recipe with potato starch. It is cheap and affordable.

    To work, prepare the following:

    • 100 g of PVA glue.
    • 100 g of potato starch.
    • 1 teaspoon of petroleum jelly or hand cream.
    • 2 tsp baby oil.
    • A spatula or kneading spoon.
    • Two heat-resistant containers of different sizes for a water bath.
    • Flat surface of the table.

    The sequence of manufacture of the mass based on potato starch

    Polymer clay according to this recipe is prepared as follows:

    • Combine all the ingredients in a smaller bowl.
    • Pour an arbitrary amount of water into a large tank so that the smaller one put into this one turns out to be in the water, but stands at the bottom rather than swimming.
    • Thoroughly mix the mass and do not overheat it.
    • When the lumps begin to form, remove from the stove and put on a greased surface with the cream and continue to knead (if the mass is not overheated, then the hands should not be hot).
    • When the clay surface becomes smooth and wrinkles do not form, wrap the mass in a film and leave it for 12 hours.

    After that, you can start sculpting or remove the clay for storage.

    Colored polymer clay

    You have learned how to make polymer clay at home in the microwave and without it. You may already have chosen the right recipe, but don’t know how to make a ton of color. There are two ways:

    • Colorize the finished craft.
    • Add pigment during mass preparation.

    After drying, the finished product can be covered with acrylic paint, tempera, and even white areas should be primed, since the material itself will appear slightly transparent, that is, a saturated white shade may not work.

    As for the second method of staining, the main thing here is not to overdo it. During the preparation process, acrylic, aniline or food colors can be added to the mass, but there should not be many of them. Otherwise, the structure of the material and its properties may change.

    Storage conditions

    Now you know how to make polymer clay at home. Recipes, of course, differ from each other both in the constituent ingredients and in the manufacturing technology. However, it is worth remembering that in all cases, in order to get high-quality material for crafts, you need to not only prepare it correctly, but also store it until the moment you decide to mold something from it.

    The mass obtained in any way must be kept in the refrigerator, always in a sealed container. It can be a plastic bag, a plastic container. The prepared clay is laid out in a suitable container. If the mass has not cooled completely yet, leave a small hole between the lid and the bottom of the container or do not tie the bag completely, just remember to close it when the mass has cooled. Otherwise, the material will dry before you decide to use it.

    Now you know how to make polymer clay at home in many ways. Choose the appropriate method based on the required ingredients or ease of manufacture.

    Homemade polymer clay recipes

    Necessary ingredients for the preparation of polymer clay:

    • PVA glue - 250 gr.
    • Corn starch - 250 gr.
    • Vaseline - 1 tablespoon
    • Lemon juice - 2 tablespoons
    • Cling film
    • Hand cream (non-greasy)

    Instructions for the preparation of polymer clay:

    1. First you need to mix the basic ingredients in any glassware: PVA glue, starch and petroleum jelly to a homogeneous mass. Then add lemon juice to the mixture and mix thoroughly again. The mass can be mixed with a fork, but it is much more convenient to work with your hands, kneading all the ingredients, as is done with a regular dough.
    2. Next, put the resulting dough for 30 seconds in the microwave and heat at maximum temperature. Then mix thoroughly again. And again, send everything to the microwave for 30 seconds.
    3. Now, after you remove the bowl from the microwave, there should be a small film on the surface of the mass, which must be carefully removed with a knife or fork.
    4. Next, you need to prepare a workplace for mixing the mass. To do this, you can use wooden fillet wrapped with cling film, but it is best to work on the table itself, after having lubricated it with non-greasy hand cream without silicones.
    5. Within 5-10 minutes, the resulting mass must be thoroughly mixed according to the example of kneading the dough. Roll the clay between your palms and knead it vigorously until you get a stretching plastic mass. The clay itself during this time should be completely cooled to room temperature and easily kneaded. All the ingredients must be combined into a uniform plastic mass, if this did not happen, you can put the clay in the microwave for a few more seconds, and then knead again. As a result, there should not be any lumps or separate ingredients in the clay.
    6. Now you can form any convenient shape from the mass and put it on a napkin or thin cloth so that excess moisture is absorbed.
    7. When the mass has completely cooled, it can be wrapped with plastic wrap. For convenience, for some time, clay can also be removed in the refrigerator, so the mass will become a little denser and less soft, such material will stick less to your hands.
    8. If you correctly completed all the previous steps, then your polymer clay with your own hands is completely ready for use.

    From this amount of ingredients, approximately 350 grams of polymer clay should be obtained. If you do not plan to use clay right away, you must store it in the refrigerator in a plastic or glass bowl with a tight-fitting lid.

    Ingredients for the preparation of polymer clay:

    • Potato starch - 100 gr.
    • PVA glue - 100 ml
    • Baby or cosmetic oil - 2 teaspoons
    • Fat cream (for children) - 1 full teaspoon

    Cooking Instructions:

    At this stage, it’s worth putting on gloves, since we will need them later, however, it will be completely inconvenient to do this.

    1. In a water bath we heat a glass jar. For this, the weakest fire and very little water will do.
    2. Now we will prepare everything you need. Pour the required amount of glue into a glass, and prepare a portion of starch in a plate in advance. Cooking and workplace. To do this, as in the previous recipe, we take a wooden or plastic board and wrap it with cling film. From above, a little grease the surface with cream.
    3. Pour glue into a jar heated in a water bath.
    4. Immediately we collect one spoon of cream and send it to the glue. Mix thoroughly until a homogeneous liquid is obtained.
    5. Immediately introduce cosmetic oil and mix thoroughly as well.
    6. Without stopping stirring, carefully pour in starch in small portions, allowing it to completely dissolve.
    7. The longer we delay the introduction of starch and let the liquid heat up, the more tight and durable polymer clay will be the result. If you do this within 5-10 seconds, you get plastic suitable for creating bijouterie jewelry, toys and figures.
    8. Without making the fire stronger, continue to stir the mass until it begins to gradually curl up. Gradually, in a few minutes, she will gather in one com.
    9. Turn off the fire, remove the jar from the stove, take out the warm, viscous dough on the board and start kneading. The mass itself will still be a little warm, it can be felt through gloves, but it can not be burned, so we continue to knead.
    10. Knead the dough until it turns out to roll a smooth, even ball without cracks and creases. This should take no more than 5-8 minutes.
    11. When we get a perfect smooth smooth ball, you need to generously grease its surface with cream and leave it in this position for about an hour. During this time, the clay should completely cool to room temperature.
    12. Gently put the resulting ball into a plastic bag, remove air from it and tighten it tightly with an elastic band. Thus, we kind of seal a rolled ball into a vacuum bag.
    13. Now our polymer clay should be infused. To do this, it must be removed in a dark, cool place with a temperature of 15-25 degrees for about 12 hours.

    In suitable condition, such polymer clay can be stored for up to 3 months.

    Although the finished polymer clay can be stored for a rather long time, this does not apply to colored clay. Special preservatives are needed to store clay using food coloring. In this regard, it is desirable to color the clay with a dye immediately before use.

    What to do if the clay has deteriorated or failed

    After prolonged storage in the refrigerator, as well as due to improper preparation, the clay may turn out to be too dry and not flexible. However, this is not a reason to throw the product.

    It can be saved by mixing to the required consistency with a new portion of softer polymer clay. As in the preparation, carefully knead the clay to a homogeneous mass and get to work.

    The same method can be used if initially the polymer clay turned out to be too liquid. Mix it with the remnants of old dried clay. Or make a new one a little drier and denser than usual, and mix it with a liquid portion.

    The second method is even simpler, because for it you do not even need to prepare a new portion of fresh clay. You just need to add a little Vaseline or cream to the old mass and also thoroughly mix until the polymer clay obtained is homogeneous.

    If your clay has been stored for a very long time and has almost dried up, then these two methods are best combined. First you need to give the mass a little viscosity and elasticity, mixing with soft clay. And then make the mass supple with Vaseline.

    How to make colored polymer clay with your own hands

    The recipe itself remains the same, but in the finished mass you need to carefully add a few drops of any food coloring and carefully mix the clay until the color becomes completely uniform. To make beautiful color transitions or get half-tones, you can mix several food colors or several shades of already painted clay. Since the materials mix well with each other, you can easily achieve the desired shade.

    Also, fluorescent glitter or fluorescent paint can be added to clay, so the finished product will glow in the dark. Various spangles or glitters can be mixed into clay. They can be found in art stores or nail design stores. To create an unusual texture in the polymer clay, you can add beads, beads or foam balls. In general, polymer clay is an ideal material for creativity and development of imagination, not only for children, but also for adults.

    Polymer Clay Product Ideas

    We figured out how to make good clay for crafts. Here are a few ideas for exciting homework.

    Probably the most popular polymer clay products is jewelry. It is very easy to fashion any jewelry from a ductile mass, whether it be earrings, beads or a bracelet. And the product itself from such material will last up to 7 years. The technique for creating jewelry or its elements is numerous. Let's consider some of them.

    Most jewelry will need beads. With such material, the design of the beads can be any, as well as color combinations. But there are two basic implementation techniques. The first is suitable for making round beads. The technique is very simple. We roll up small neat balls of polymer clay and pierce them with a needle of a slightly larger diameter than the one on which we will then string them. Remove from the needle. Once again, slightly smooth the shape and done. You can spread it on the windowsill and leave to dry. In about a day, bright light beads are ready to become part of the jewelry.

    The second option is similar to the technique of creating glass beads or rolling candy. First, we select the appropriate clay colors and roll them together in random order. Then from this mass we roll a long thin tube. Be sure to ensure that the entire tube is approximately the same diameter. Then, using a knife, cut off a centimeter from both ends of the tube, this excess material can be removed. We cut the remaining clay into neat small discs. In the center of each, we make a hole with a needle, so that later they can be strung on a fishing line or rubber band. If this technique seems too easy for you, and you already understand how the pattern is laid out in such beads, you can try to make not just an arbitrary ornament, but a real pattern that will be repeated on each bead. To do this, each individual colored element will consist of many pieces of polymer clay as thin as a thread. Then they are folded onto each other and one bar is formed, which is then cut.

    At first glance, creating polymer clay jewelry may seem too complicated, but such an activity simply requires imagination and dexterity, which will gradually come with experience in this matter. So do not be afraid to experiment and you will surely succeed.

    You can also try to create unique polymer clay earrings. Most often, the design of such jewelry is of two options. Or repeats the model of beads, that is, it is made of exactly the same beads. Or various figures are molded. You can even make two different earrings, but in the same theme. By the way, this is a great gift idea for friends or decorations for yourself for the summer. Most often sculpted animal figures, emoticons. birds, fruits and sweets. Such forms are quite simple and almost everyone can fashion them. But in the end they look very unusual and fun.

    How to make polymer clay jewelry?

    After the beads for the product are ready, you can begin to work. If it is a kit, it is always better to start with the most voluminous and complex part. For example, these will be beads. You need to decide how many rows should be in the decoration. You can string the beads in two or three rows. But it’s even more interesting to make several threads from the same beads, and then twist one large bundle out of them. Both options will look interesting and attract attention. For beads, you should buy a clasp at any sewing store. It will be fastened on both sides with the help of clamping locks, you can fix such a lock even without special tools. Only pliers may be needed to tighten the ring.

    The bracelet can be made simple by stringing various beads in one row, or repeating the design on the beads. In any case, it is worth starting from the overall style of the kit. Since at least such polymer clay jewelry will in any case be an accent in the image, they must be combined with each other.

    With earrings, everything is much simpler. Often it consists of one minimalistic or vice versa bulky bead. In order to make jewelry, you should also purchase several clamping rings for jewelry and the earrings themselves. For example, cloves. A pin or paper clip can be used to secure the beads. It is necessary to bend one end a few millimeters, and pass the other through the bead, then use the rings to fix the bead on the earring. It is important to pay attention to the fact that the bead would hang directly, if it turns with an edge, you need to add one more ring.

    You can also add a ring to the kit. The easiest way here is to buy a blank for the ring and use super-glue to fix a small bead repeating the design from other jewelry.

    In any case, no matter what the gift, it will be the most beautiful only if it is made with a pure heart. If you created it with positive thoughts and a smile on your face, then the craft will radiate joy and kindness.

    Delight your loved ones with pleasant little things. And though such things will not be especially useful and not useful in everyday life, you can be sure that everyone will remember such a gift with their own hands.